Wednesday, December 28, 2016

Check for Molds before Buying Older Homes

What to check

Check for molds and fungus before making a purchase decision. (Photo Credits)

Carefully inspecting a home one is about to buy is a move every buyer should undertake. Molds for instance can be a potential deal breaker when buying older homes simply because it will warrant professional restoration services for it not to affect occupants as well as the structure of the home.

This is the reason why there are tips and warnings out there about inspections that should be conducted prior to making the decision to purchase. How to deal with flooding

Apartment Therapy says weird odors may be one indicator of a mold problem in an older home. “The thing about weird smells is that they have a source, and the source can cost you major dinero to fix. In older homes, it’s tempting to chalk up any mustiness to that “old house smell.” Real estate agents may even refer to it that way, or try to camouflage the odors with candles or air fresheners. It’s always good to bring up any funky smells when you’re touring a potential home, though, because such smells can be indicators of big problems like water damage, mildew, mold, and even infestations of pests like rats or cockroaches.”

Read the whole post here.

Carefully Inspect

Raywhite.com also has the same warning for potential home buyers. Floods

“Take a close look at the exterior and interior walls, as well as floorboards, skirting boards and the roof. Look out for signs of mould or damp, and check for sagging or cracking that could be a result of structural problems.”

Check out the rest of the post here.

You may also want to read:

If all else fails and a person accidentally bought a house infested with molds, he or she can always commission a professional mold restoration specialist. It will also not hurt to check out natural ways to get rid of mold – of course on top of expert professional service. The Daily Health Post has some tips.

“A simple and inexpensive solution to your mold problem is using 3% hydrogen peroxide. Mix equal parts hydrogen peroxide with baking soda and vinegar. Pour the mixture into a spray bottle and use over the affected area. Let sit for 10-15 minutes. Then scrub and wipe using a clean cloth.”

Check out the whole article from daily health post here.

A professional mold inspection is definitely one of the best things to undertake before buying an older home.

Natural Air Purifiers

http://www.moldfixer.org/natural-air-purifiers/embed/#?secret=GeEYpg3Lue

The post Check for Molds before Buying Older Homes appeared first on Mold Fixer.

Check for Molds before Buying Older Homes

What to check

Check for molds and fungus before making a purchase decision. (Photo Credits)

This is the reason why there are tips and warnings out there about inspections that should be conducted prior to making the decision to purchase. How to deal with flooding

Apartment Therapy says weird odors may be one indicator of a mold problem in an older home. "The thing about weird smells is that they have a source, and the source can cost you major dinero to fix. In older homes, it's tempting to chalk up any mustiness to that "old house smell." Real estate agents may even refer to it that way, or try to camouflage the odors with candles or air fresheners. It's always good to bring up any funky smells when you're touring a potential home, though, because such smells can be indicators of big problems like water damage, mildew, mold, and even infestations of pests like rats or cockroaches."

Read the whole post here.

Carefully Inspect

Raywhite.com also has the same warning for potential home buyers. Floods

"Take a close look at the exterior and interior walls, as well as floorboards, skirting boards and the roof. Look out for signs of mould or damp, and check for sagging or cracking that could be a result of structural problems."

Check out the rest of the post here.

You may also want to read:

"A simple and inexpensive solution to your mold problem is using 3% hydrogen peroxide. Mix equal parts hydrogen peroxide with baking soda and vinegar. Pour the mixture into a spray bottle and use over the affected area. Let sit for 10-15 minutes. Then scrub and wipe using a clean cloth."

Check out the whole article from daily health post here.

A professional mold inspection is definitely one of the best things to undertake before buying an older home.

Natural Air Purifiers

http://www.moldfixer.org/natural-air-purifiers/embed/#?secret=GeEYpg3Lue

The post Check for Molds before Buying Older Homes appeared first on Mold Fixer.

Sunday, November 20, 2016

The Importance of Fire Sprinklers

The need for fire sprinklers

There when needed. (Photo Credits)

Fire Sprinklers can literally save the day when it comes to building and commercial establishment fires. It does not only help put out fires it buys occupants more time to get out from the burning area and save some property as well. Removing Mold

The website Seeker tried to explain how it works.

"Modern fire sprinklers typically use a heat-activated glass bead filled with liquid or a color-coded piece of metal. Inside the bead is a glycerin-based liquid which expands when heated to a specific temperature. The expanding liquid breaks the glass, triggering the release of water through the overhead pipes. Most fire suppression systems of this type are strictly local. Triggering the sprinkler in an office or hotel room won't cause the entire system to go off. There are exceptions, though. So-called deluge systems will turn on all sprinklers at once, but they're typically reserved for places where fires could get serious fast, like power plants or airplane hangers."

Read the whole write-up here.

Life-Saving

WBOC 16 shared a story on how fire sprinklers helped in putting out a fire in a Restaurant. Molds

"A fire at an Ocean City restaurant was quickly put out thanks to fire sprinklers and a kitchen extinguishing system, reigniting the push for the proper use of fire protection systems."

Read the whole story here.

You may also want to read:

As such fire sprinkler systems are viewed as something that Is life-saving as it allows people to escape and remain unharmed while waiting for fire protection services.

This is most probably the reason why British-based website Independent reported about their citizens who are complaining about their government's move to no longer require schools to have a fire sprinkler system.

"The move has been lambasted by fire officers and follows two recent major school fires."

Check out the rest of the story here.

Regardless of the law's requirement, most people view having fire sprinklers as a safety measure against home fires.

Fire Safety for Kids

http://www.moldfixer.org/fire-safety-kids/embed/#?secret=cx5dBhwZHh

The post The Importance of Fire Sprinklers appeared first on Mold Fixer.

The Importance of Fire Sprinklers

The need for fire sprinklers

There when needed. (Photo Credits)

The website Seeker tried to explain how it works.

“Modern fire sprinklers typically use a heat-activated glass bead filled with liquid or a color-coded piece of metal. Inside the bead is a glycerin-based liquid which expands when heated to a specific temperature. The expanding liquid breaks the glass, triggering the release of water through the overhead pipes. Most fire suppression systems of this type are strictly local. Triggering the sprinkler in an office or hotel room won’t cause the entire system to go off. There are exceptions, though. So-called deluge systems will turn on all sprinklers at once, but they’re typically reserved for places where fires could get serious fast, like power plants or airplane hangers.”

Read the whole write-up here.

Life-Saving

WBOC 16 shared a story on how fire sprinklers helped in putting out a fire in a Restaurant. Molds

“A fire at an Ocean City restaurant was quickly put out thanks to fire sprinklers and a kitchen extinguishing system, reigniting the push for the proper use of fire protection systems.”

Read the whole story here.

You may also want to read:

As such fire sprinkler systems are viewed as something that Is life-saving as it allows people to escape and remain unharmed while waiting for fire protection services.

This is most probably the reason why British-based website Independent reported about their citizens who are complaining about their government’s move to no longer require schools to have a fire sprinkler system.

“The move has been lambasted by fire officers and follows two recent major school fires.”

Check out the rest of the story here.

Regardless of the law’s requirement, most people view having fire sprinklers as a safety measure against home fires.

Fire Safety for Kids

http://www.moldfixer.org/fire-safety-kids/embed/#?secret=cx5dBhwZHh

The post The Importance of Fire Sprinklers appeared first on Mold Fixer.

Wednesday, September 7, 2016

The truth about Black Molds

When black Molds Infest a Home

The issue with black molds. (Photo Credits)

Having black molds grow in any home can be a cause for concern. It is very alarming that it should never be shrugged off.

The website This Old House explained how Black Molds grow, specifically in the attic.

“That’s because all season long, warm moist air has been leaking from the house and into the attic, where it has condensed on—and been absorbed by—the cold underside of the plywood roof sheathing. As temperatures warm up and the icy plywood thaws out, the conditions are perfect for mold to grow on the wet wood. As the weather gets warmer and the sheathing dries out, that mold will go dormant until conditions allow it to start growing again. Dormant or not, black mold isn’t something you want in your house”

Read the whole explanation here.

More information on Black Molds

Connecticut-Based JP Maguire meanwhile shared more information about Black Molds in one of its published posts.

“Ideal humidity for this black mold is a relative humidity of 90% or higher for it to begin the germination growth process. Stachybotrys feeds on materials with a high cellulose content such as hay, straw, wood chips, and building materials such as ceiling tile, drywall, paper vapor barriers, wallpaper, insulation backing, cardboard boxes, and paper files.”

Check out the infographic here.

Related Mold, Fire and Flood Remediation Services:

The website 101 Cleaning Tips for its part shared ways to remove black molds from a bathroom sealant.

“In order to kill mold from the bathroom sealant, you can choose several chemicals such as chlorine and ammonia, or you can choose a natural product you can mix it by yourself. Put 2/3 white vinegar in a spray bottle and add 2 teaspoons of baking soda. Whatever product you use, simply spray the silicone mold from the shower and let the mixture act for about an hour. This will kill the mold spores and will prevent them from growing and spreading.”

Read the rest of the instructions here.

The best way to totally eliminate black mold growth is calling expert removal services from contractors.

http://www.moldfixer.org/helpful-tips-prevent-eliminate-molds/

The post The truth about Black Molds appeared first on Mold Fixer.

The truth about Black Molds

When black Molds Infest a Home

The issue with black molds. (Photo Credits)

Having black molds grow in any home can be a cause for concern. It is very alarming that it should never be shrugged off.

The website This Old House explained how Black Molds grow, specifically in the attic.

"That's because all season long, warm moist air has been leaking from the house and into the attic, where it has condensed on—and been absorbed by—the cold underside of the plywood roof sheathing. As temperatures warm up and the icy plywood thaws out, the conditions are perfect for mold to grow on the wet wood. As the weather gets warmer and the sheathing dries out, that mold will go dormant until conditions allow it to start growing again. Dormant or not, black mold isn't something you want in your house"

Read the whole explanation here.

More information on Black Molds

Connecticut-Based JP Maguire meanwhile shared more information about Black Molds in one of its published posts.

"Ideal humidity for this black mold is a relative humidity of 90% or higher for it to begin the germination growth process. Stachybotrys feeds on materials with a high cellulose content such as hay, straw, wood chips, and building materials such as ceiling tile, drywall, paper vapor barriers, wallpaper, insulation backing, cardboard boxes, and paper files."

Check out the infographic here.

Related Mold, Fire and Flood Remediation Services:

The website 101 Cleaning Tips for its part shared ways to remove black molds from a bathroom sealant.

"In order to kill mold from the bathroom sealant, you can choose several chemicals such as chlorine and ammonia, or you can choose a natural product you can mix it by yourself. Put 2/3 white vinegar in a spray bottle and add 2 teaspoons of baking soda. Whatever product you use, simply spray the silicone mold from the shower and let the mixture act for about an hour. This will kill the mold spores and will prevent them from growing and spreading."

Read the rest of the instructions here.

The best way to totally eliminate black mold growth is calling expert removal services from contractors.

http://www.moldfixer.org/helpful-tips-prevent-eliminate-molds/

The post The truth about Black Molds appeared first on Mold Fixer.

Saturday, July 23, 2016

HVAC and Mold Growth

When Molds Affect a Property's HVAC System

Molds can invade an HVAC System too. (Photo Credits)

When mold exposure symptoms are felt in a household or by occupants of a commercial property, its presence on an HVAC System should not be discounted.

Facilities Net explains how this is possible.

"A variety of factors can contribute to the growth of mold in institutional and commercial facilities, but one all-too-common culprit is HVAC equipment. The HVAC system, including piping and drain pans, can be sources of mold growth and a transportation mode for dispersing mold spores throughout a building. Maintenance and engineering managers who understanding the ways that HVAC systems can contribute to mold issues stand a better chance of developing strategies to prevent such problems."

Read the rest of the article here.

Signs of Mold Growth

Moldblogger for its part shared hoe to find out if there is mold presence in an HVAC System. Removing Mold

"Have you recently begun noticing a strong smell of mildew when your home's HVAC system is running? If so, then it may be time to examine your system for a mold problem. Over time, it is not uncommon for mold to begin growing within the internal components of an HVAC system. While this is not inherently harmful, it can become a problem if you start to smell the mildew or mold; this means that the mold spores are actually making their way into the air, which can be hazardous to your health. Specifically, mold is known to be damaging to the human respiratory system and can even further aggravate asthma for those who have it."

Check out the whole post here.

You may also want to read:

Our Awards
How to prevent mold from your carpets
Tales on Firefighters
MF's Temecula Water Service Homepage
Plants That Help Clean the Air in your Home

Hawaii Army Weekly for its part emphasized that improper use of the HVAC System can further encourage mold growth. 'Mold growth only requires three things to prosper: 1- Relative humidity greater than 60 percent, such as from moisture from water spills, leaky roofs and condensation; 2- Food, such as dirty carpeting, dust, etc.; 3- Water. Furthermore, adding to mold issues are improper uses of heating, ventilation and air conditioning (HVAC/AC) systems, which contribute immensely to its proliferation. So how exactly are Soldiers, U.S. Army Garrison-Hawaii residents and employees expected to combat mold, and how do HVAC systems contribute to its growth cycles?"

Read the continuation of this post here.

A mold removal company can expertly determine and help any property owner deal with molds in an HVAC System. Call for expert mold removal service now.

http://www.moldfixer.org/water-damage-can-emanate-from-a-leaking-roof

The post HVAC and Mold Growth appeared first on Mold Fixer.